Introduction

Grounding pads, also known as surface mount gaskets or board pads, ensure electrical performance without breaking under mechanical or environmental stress throughout the lifetime of the product.  Schlegel’s Doubleshield Pad ensures reliable grounding performance in electronic applications. The Pads are delivered in tape-and-reel packaging for automated placement and soldering reflow using standard SMT equipment.

Features and Benefits

The flexible and easily compressible grounding pad can to take up tolerances and close the gap between a PCB and another component in addition to providing a reliable grounding contact.

• SMT compatible
• Excellent mechanical properties
• Large conformable contact area

Applications

The Doubleshield Pad is used as a grounding contact on printed circuit boards commonly used in the electronics industry.

Product Description

The Doubleshield Pad has hollow profile with a core of soft silicone and a shell of electrically conductive silicone rubber filled with Ni/C particles.

The product is laminated with a solderable metal strip in Nickel alloy 201.

Product Dimensions

The Doubleshield Pad is delivered in three different versions but different cross sections and length can be developed to fit any demand.

Product Properties

The recommended operating temperature is between -55°C and +125 °C. To assure a safe and repeatable compression Schlegel recommend the use of mechanical compression stops allowing a compression degree of 20 – 25%. Minimum 10% and maximum 50% compression is recommended.

The Schlegel Doubleshield Pad fulfil the requirements set by the Directive 2011/65/EU and its amendments (RoHS).

Compression Force

The compression force versus compression degree is shown in the graph below.

Electrical Resistance

The electrical resistance versus compression degree is shown in the graph below.

Packaging

The Doubleshield Pad is packaged and delivered in tape-and-reel.

Storage Conditions

The grounding pad is delivered in sealed plastic bags and the products are as such considered as MSL-1 with an unlimited storage time. This assumes that the storage is indoors to protect the product from rain and direct sunshine and at a temperature between 5 and 30°C and a relative humidity of 20-80%.

Disclaimer

The data given in this product information should be taken only as a guide and not a specification.
The recommendations and data given are based on our experience to date, however, no liability can be assumed in connection with their usage and processing.

The E/Gasket-WOS establishes EMI/RFI integrity with high attenuation

Avoid the risk of EMI or environmental seal failure.

The E/Gasket-WOS, Wire Oriented in Silicone, stands up to the test. Schlegel Electronic Materials’ (SEM) E/Gasket-WOS combines the benefits of two robust materials into one gasket. Its high- quality commercial or military grade silicone maintains a strong environmental seal, while a choice of wire substrates offers both high levels of attenuation and galvanic compatibility/ E/Gasket-WOS also resists compression set over a wide temperature range for lasting performance.

Available in both solid and sponge silicone, with aluminum or monel embedded wires. E/Gasket-WOS comes in sheet and strip forms-with or without silicone compatible Pressure Sensitive Adhesive (PSA).

Custom orders are available upon request.

For performance characteristics and ordering information please download SEM ’s Conductive Elastomers pdf or contact your SEM representative.

Specifications

Most commonly used substrates. Other combinations are available upon request.

Wide range of shielding effectiveness available with highest quality formulations

An application requiring reliable, cost-effective EMI shielding needs Schlegel Electronics Materials’ (SEM) Conductive Silicone Elastomer Gaskets-E/Gasket-CSE. SEM’s E/Gasket-CSE offers a durable composite of high-quality silicone and conductive microscopic particles–manufactured to strict formulations—that provide shielding to answer any EMI challenge. Three popular composites are: silver-plated aluminum filled elastomers which are specially formulated for applications requiring both high levels of shielding and galvanic compatibility to a wide variety of metal interfaces. Silver-plated copper filled elastomers provide a higher level of shielding than most particle-filled elastomers. The nickel-coated graphite elastomers are available for applications requiring less conductivity but better galvanic compatibility to mating surfaces in applications with environmental exposure. Custom compounds can be formulated to fit specific requirements

E/Gasket-CSE is available in molded, sheet or extruded form from D-shapes to O-rings.

For performance characteristics and ordering information please download SEM’s Conductive Elastomers Catalog or contact your SEM representative.

Schlegel Electronics Materials can supply several common composite materials as sheet, strips, or die-cut gaskets. Each has fluid/pressure sealing characteristics when correctly integrated between mating surfaces.

Typical applications include connectors, avionics equipment, engine management systems and wave guides.

These gasket materials are an oriented matrix of wires bonded into a solid or sponge elastomer base. This material allows good electrical contact on less than ideal surface finishes while not allowing electrical conduction across the width of the gasket.

A flourosilicone variant is available for applications where fuel and oil resistance is necessary:

Woven aluminum mesh impregnated with a silicone or neoprene elastomer.
Expanded Monel mesh filled with a silicone elastomer.